BALL SOCKET similar to DIN 71805 form AL long version with internal snap ring |
| AL10 M 6 | 10 | M6 | 40 | 10 | 14,8 | 26,5 | 32 | 0,65 | 8 | 0,015 | | AL13 M 8 | 13 | M8 | 45 | 13 | 19,3 | 29 | 34 | 1,15 | 11 | 0,039 | | AL16 M10 | 16 | M10 | 45 | 16 | 24 | 30,5 | 35,5 | 1,15 | 13 | 0,067 |
Attached Documents
 Technical data
 Download Product Table in Excel
 Download technical drawings in DWG
 Download technical drawings in DXF
 Download technical drawings in GIF
| BALL SOCKET similar to DIN 71805 form BL long version with internal snap ring |
| BL10 M 6 | 10 | M6 | 25 | 10 | 14,8 | 11,5 | 17 | 0,65 | 7 | 8 | 0,014 | | BL13 M 8 | 13 | M8 | 30 | 13 | 19,3 | 14 | 20 | 1,15 | 9,1 | 11 | 0,029 | | BL16 M10 | 16 | M10 | 45 | 16 | 24 | 30,5 | 35,5 | 1,15 | 11,4 | 13 | 0,067 |
Attached Documents
Technical data
Download Product Table in Excel
Download technical drawings in DWG
Download technical drawings in DXF
Download technical drawings in GIF
Notes
* Spanner flats
For left - hand thread add "LH" (ex. AL16 M10 LH or BL16 M10 LH) Material:
Socket: 11SMnPb30 steel with tensile strength of 50 daN/mm2 (1.0718)
Internal snap ring "R": spring steel C98 UNI EN 10270-1 DH Surface protection:
-Zinc plating according to EN ISO 4042, Fe/Zn 8c...
-Chromate treatment (passivation) example: type A please add 1A (ex.: BL10 M6 1A)
-surface treatment table Tolerance: the dimensional tolerances in the table make reference to zinc plated products.
|
