BALL SOCKET DIN 71805 form A with internal snap ring

Designation	d1 H9	d2 6H	a ±0,3	d3 ±0,5	d4 ±0,5	e min.	l1 ±0,3	h2 ±0,5	*sw1 h14	weight (Kg)
A 8 M 5	8	M5	22	8	12,8	10,2	15	0,65	7	0,009
A10 M 6	10	M6	25	10	14,8	11,5	17	0,65	8	0,014
A13 M 8	13	M8	30	13	19,3	14	20	1,15	11	0,029
A16 M10	16	M10	35	16	24	16	22	1,15	13	0,057
A16 M12	16	M12	35	16	24	16	22	1,15	-	0,057
A19 M14x1,5	19	M14x1,5	45	22	30	21,5	28	0,5	-	0,125
A19 M14	19	M14	45	22	30	21,5	28	0,5	-	0,125
A19 M16	19	M16	45	22	30	21,5	28	0,5	-	0,125

Attached Documents

Technical data

Download Product Table in Excel

Download technical drawings in DWG

Download technical drawings in DXF

Download technical drawings in GIF

Series
B

BALL SOCKET DIN 71805 form B with internal snap ring

Designation	d1 H9	d2 6H	a ±0,3	d3 ±0,5	d4 ±0,5	e min.	l1 ±0,3	h2 ±0,5	l2 ±0,3	*sw1 h14	weight (Kg) ≈
B 8 M 5	8	M5	22	8	12,8	10,2	15	0,65	6,3	7	0,009
B10 M 6	10	M6	25	10	14,8	11,5	17	0,65	7	8	0,014
B13 M 8	13	M8	30	13	19,3	14	20	1,15	9,1	11	0,029
B16 M10	16	M10	35	16	24	16	22	1,15	11,4	13	0,057
B16 M12	16	M12	35	16	24	16	22	1,15	11,4	-	0,057
B19 M14x1,5	19	M14x1,5	45	22	30	21,5	28	0,5	12,5	-	0,125
B19 M14	19	M14	45	22	30	21,5	28	0,5	12,5	-	0,125
B19 M16	19	M16	45	22	30	21,5	28	0,5	12,5	-	0,125

Attached Documents

Technical data

Download Product Table in Excel

Download technical drawings in DWG

Download technical drawings in DXF

Download technical drawings in GIF

Notes

* Spanner flats

For left - hand thread add LH (ex. A16 M10 "LH" or B16 M10 LH)
Material:
Ball socket: steel 11SMnPb30 with a 50 daN/mm² resistance to tensile stress (1.0718)
Internal snap ring "R": steel for springs C98 UNI EN 10270-1 DH
Surface protection:
-Zinc plating according to EN ISO 4042, Fe/Zn 8c...
-Exemple of chromate treatment (passivation): type A add 1A (ex.: B 10 M6 1A)
-Surface treatments table
Tolerance: the dimensional tolerances in the table make reference to zinc plated products.