Similar to DIN 71802 CSL form long version

Designation	d1	d2 6g/6H	a ±0,3	d3 ±0,5	d4 ±0,5	d6 h14	e min.	h2 ±0,5	l2 ±0,3	l3 ±0,3	r max.	*sw h14	*sw1 h14	α° ≈	weight (Kg) ≈
CSL10 M 6x40	10	M6	40	10	14,8	10	26,5	0,65	12,5	11	0,3	8	8	15	0,031
CSL13 M 8x45	13	M8	45	13	19,3	13	29,0	1,15	16,5	13	0,5	11	11	15	0,063
CSL16 M10x45	16	M10	45	16	24,0	16	30,5	1,15	20,0	16	0,5	13	13	15	0,113

Attached Documents

Technical data

Download Product Table in Excel

Download technical drawings in DWG

Download technical drawings in DXF

Download technical drawings in GIF

Series
CL

Similar to DIN 71802 CL form long version

Designation	d1	d2 6g/6H**	a ±0,3	d3 ±0,5	d4 ±0,5	d6 h14	e min.	h2 ±0,5	l2 ±0,3	l3 ±0,3	r max.	*sw h14	*sw1 h14	α° ≈	weight (Kg) ≈
CL10 M6x40	10	M6	40	10	14,8	10	26,5	0,65	12,5	11	0,3	8	8	15	0,031
CL13 M8x45	13	M8	45	13	19,3	13	29	1,15	16,5	13	0,5	11	11	15	0,063
CL16 M10x45	16	M10	45	16	24	16	30,5	1,15	20	16	0,5	13	13	15	0,113

Attached Documents

Technical data

Download Product Table in Excel

Download technical drawings in DWG

Download technical drawings in DXF

Download technical drawings in GIF

Notes

* Spanner flats
** Tolerance d2: ball stud 6g - threaded hole 6H

For left - hand thread add "LH" (ex. CSL16 M10 LH or CL16 M10 LH)
Material:
Ball stud: carbon steel with traction resistance of 60 daN/mm2 and a ball tempered on the surface with hardness ≥ 52 Hrc
Ball socket: 11SMnPb30 steel with tensile strength of 50 daN/mm2 (1.0718)
Internal snap ring "R": spring steel C98 UNI EN 10270-1 DH
Safety clip "S": spring steel C98 UNI EN 10270-1 DH
Surface protection:
-Zinc plating according to EN ISO 4042, Fe/Zn 8c...
-Chromate treatment (passivation) example: type A please add 1A (ex.:CS 10 M6 1A)
-surface treatment table
Tolerances: the dimensional tolerances shown in the table make reference to zinc plated products.