| PD 4 | 4 | 6 | 1,0 | 0,5 | 0,8 | 0,3 | 1,0 | 10,0 | 12 | 0,001 | | PD 5 | 5 | 6 | 1,0 | 0,5 | 0,8 | 0,3 | 1,0 | 12,0 | 15 | 0,001 | | PD 6 | 6 | 9 | 1,5 | 0,5 | 1,0 | 0,5 | 1,6 | 15,0 | 18 | 0,004 | | PD 8 | 8 | 12 | 2,0 | 1,0 | 1,0 | 0,5 | 2,0 | 19,5 | 23 | 0,009 | | PD 10 | 10 | 14 | 2,0 | 1,0 | 1,5 | 0,5 | 3,2 | 24,5 | 29 | 0,017 | | PD 12 | 12 | 17 | 3,0 | 1,5 | 2,0 | 0,5 | 4,0 | 29,5 | 35 | 0,030 | | PD 14 | 14 | 19 | 3,0 | 1,5 | 2,5 | 1,0 | 4,0 | 32,5 | 40 | 0,048 | | PD 16 | 16 | 21 | 3,0 | 1,5 | 2,5 | 1,0 | 4,0 | 37,5 | 45 | 0,067 | | PD 18 | 18 | 23 | 3,0 | 1,5 | 2,5 | 1,0 | 5,0 | 43,5 | 50 | 0,108 | | PD 20 | 20 | 26 | 4,0 | 2,0 | 3,0 | 1,0 | 5,0 | 47,0 | 54 | 0,125 | | PD 25 | 25 | 32 | 5,0 | 2,0 | 3,0 | 1,0 | 6,0 | 59,0 | 67 | 0,260 | | PD 30 | 30 | 36 | 5,0 | 2,0 | 3,0 | 1,0 | 6,3 | 63,0 | 71 | 0,430 | | PD 35 | 35 | 44 | 6,0 | 2,0 | 4,0 | 2,0 | 8,0 | 80,0 | 90 | 0,740 | | PD 42 | 42 | 48 | 6,0 | 2,0 | 4,0 | 2,0 | 8,0 | 98,0 | 108 | 1,259 | | PD 50 | 50 | 58 | 7,0 | 2,0 | 6,0 | 2,0 | 10,0 | 111,0 | 123 | 2,021 |
Attached Documents
 Technical data
 Download Product Table in Excel
 Download technical drawings in DWG
 Download technical drawings in DXF
 Download technical drawings in GIF
| WASHERS DIN 433 or equivalent |
| PDR 4 | 4,3 | 7,5 | 0,8 | 0,019 | | PDR 5 | 5,3 | 9,5 | 1,0 | 0,038 | | PDR 6 | 6,4 | 11,0 | 1,6 | 0,079 | | PDR 8 | 8,4 | 15,0 | 1,6 | 0,152 | | PDR 10 | 10,5 | 18,0 | 1,6 | 0,211 | | PDR 12 | 13,0 | 20,0 | 2,0 | 0,285 | | PDR 14 | 15,0 | 24,0 | 2,0 | 0,433 | | PDR 16 | 17,0 | 27,0 | 2,0 | 0,542 | | PDR 18 | 19,0 | 30,0 | 2,0 | 0,800 | | PDR 20 | 21,0 | 33,0 | 2,5 | 0,998 | | PDR 25 | 25,0 | 39,0 | 4,0 | 2,209 | | PDR 30 | 31,0 | 56,0 | 4,0 | 5,361 | | PDR 35 | 37,0 | 66,0 | 5,0 | 9,203 | | PDR 42 | 42,0 | 78,0 | 7,0 | 18,635 | | PDR 50 | 50,0 | 92,0 | 8,0 | 29,401 |
Attached Documents
Technical data
Download Product Table in Excel
Download technical drawings in DWG
Download technical drawings in DXF
Download technical drawings in GIF
| SPLIT PINS DIN 94 UNI EN ISO 1234 |
| PDC 4 | 10 | 1,0 | 2,5 | 1,5 | 0,9 | | PDC 5/6 | 10 | 2,0 | 3,3 | 2,0 | 1,3 | | PDC 8 | 15 | 2,0 | 4,0 | 2,3 | 1,8 | | PDC 10 | 20 | 2,0 | 5,0 | 3,0 | 2,7 | | PDC 12/16 | 30 | 3,0 | 7,2 | 4,1 | 3,7 | | PDC 18/20 | 40 | 3,0 | 8,2 | 4,7 | 4,7 | | PDC 25/30 | 50 | 3,0 | 10,2 | 5,7 | 5,7 | | PDC 35/42 | 60 | 3,0 | 13,5 | 7,7 | 7,7 | | PDC 50 | 70 | 4,0 | 17,0 | 9,7 | 9,7 |
Attached Documents
Technical data
Download Product Table in Excel
Download technical drawings in DWG
Download technical drawings in DXF
Download technical drawings in GIF
Notes
Material:
Pin: automatic steel 11SMnPb30 (1.0718), Washers: 4.8 steel, Split pins: Fe 37
Surface protection:
-Zinc plating according to standard EN ISO 4042, Fe/Zn 8c...
-Exemple of chromate treatment (passivation): type A please add 1A (ex.:PD10 1A)
-Surface treatments table
-With no indications the pin will be supplied oiled and unplated
Tolerances: the dimensional tolerances shown in the table make reference to zinc plated products.
The values marked on the table are purely as an indication.
|
